Bearing Wholesalers

Bearing Wholesalers ,Bearing Service Sinagpore,Bearing Indonesia Supplier

Home > Products > Bearing Agents/Distributors > Nachi Authorized Agents/Distributor Supplier in Singapore
 

Product Groups

 

see more +

 

Nachi Authorized Agents/Distributor Supplier in Singapore

Place of Origin:
Japan
Brand Name:
Nachi Bearing
Certification:
ISO9001,CE,CO,CQ,etc
Model Number:

Contact with us

Min.Order Quantity:
1pcs
Price:
Negotiation
Packaging Details:
Standard Packaging
Delivery Time:
3-5 working days
Payment Terms:
L/C,D/P,D/A,T/T,Western Union,MoneyGram
Supply Ability:
1000sets
Contact Now
 

Product Description

Nachi Bearings Authorized Agent/Distributor

1 Radial Ball Bearings

1)Deep Groove Ball Bearings

Deep Groove ball bearings are the most popular of all the ball bearing types because they are available in a wide variety of seal, shield and snap-ring arrangements.
The bearing ring grooves are circular arcs made slightly larger than the radius of the ball. The balls make point contact with the raceways (elliptical contact when loaded). The inner ring shoulders are of equal height (as the outer ring shoulders).
Deep Groove ball bearings can sustain radial, axial, or composite loads and because of simple design, this bearing type can be produced to provide both high-running accuracy and high-speed operation.

2)Single-row Angular Contact Ball Bearings

The raceways of both the inner and outer rings of this bearing type are made with a set contact angle.
Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction.
Larger contact angle type has better axial load capability.
Small contact angle type has higher permissible speed capability.
This bearing type is generally used in adjacent positions.

3)Combination Angular Contact Ball Bearings

Normally Single Row Angular Contact Ball Bearings are used as a combination of two or more bearings.
Three types of combinations are available;
1) DB, back to back
2) DF, face to face
3) DT, tandem
Clearance of matched set are adjusted before shipment, care should be taken to prevent mixing of parts from other sets.
High precision paired combination Angular Contact Ball Bearings (JIS/ISO class 5 or higher) are used for applications such as machine tool spindles and are usually preloaded.

4)Double-row Angular Contact Ball Bearings

The construction of this ball bearing is similar to mounting two single row angular ball bearings back to back(DB).
Capacities of double row ball bearing is less than single row since few balls can be inserted per row.
This bearing type can sustain radial, moment and bi-directional axial loads.

5)Self-aligning Ball Bearings

This type is constructed with the inner ring and ball assembly contained within an outer ring which has a spherical raceway for self aligning.
Self-aligning Ball Bearings are particularly suitable for applications where misalignment occurs from errors in mounting or from shaft deflection.

2 Radial Roller Bearings

1)Cylindrical Roller Bearings

Large radial load capacity.
Suitable for high-speed applications. Low friction between rollers and flanges.

2)Double - row Cylindrical Roller Bearings

Larger load capacity than single-row cylindrical roller bearings.
Used for machine tool spindles etc.

3)Tapered Roller Bearings

A single-row Tapered roller bearing can support a combined radial and axial load.
Used as a combination or a double-row.

4)Double-row Tapered Roller Bearings

Two single-row cups end one double cone; one double cup and two single-row cones.

5)Spherical Roller Bearings

The spherical raceway of outer rings are manufactured and assembled focusing to the center of bearings.
Barrel type rollers and cages are assembled with inner rings.
NACHI Spherical Roller Bearings are suitable for high axial , impulse and heavy load applications such as paper manufacturing, rolling and other large size machineries.

3 Thrust Ball Bearings

1)Single Direction Thrust Ball Bearings

Thrust ball bearings are designed to handle axial loads only.
Thrust ball bearings consist of ball, retainer and both shaft and housing washers which contain grooves for the ball.
The double Direction Thrust ball bearings can support bi-directional loads.
Thrust ball bearings are designed to handle axial loads only.
Thrust ball bearings consist of ball, retainer and both shaft and housing washers which contain grooves for the ball.
The double Direction Thrust ball bearings can support bi-directional loads.

2)Double-direction Thrust Ball Bearings

Carrying axial loads in both directions.
This Bearing consists of 3 kinds of grooved washer bearing rings, 2 kinds of cage and ball assembly.
Aligning seat washers with an aligning surface radius are also available for ease of design and mounting against a flat housing shoulder.

3)Double-direction Thrust Angular Contact Ball Bearings TAD series

Double-direction Thrust Bearing used in machine tool spindle. High contact angles carry high axial loads.

4 Thrust Roller Bearings


1) Spherical Roller Thrust Bearings


The raceway of housing washer of this bearing type is spherical with the center of the radius located on the bearing axis. The design provides self-alignment capability to the bearing. The contact angle (α) is approximately 45° enabling the bearing to support axial load and a small to moderate amount of radial load.

Our company not only supply bearings,also supply all kinds of Hydraulic Equipment.

Along with constantly improving performance, industrial machines continue to become increasingly sophisticated. Hydraulic equipment has to meet the challenge of diversifying needs.
You may already appreciate the Nachi-Fujikoshi reputation for compact equipment that delivers energy efficiency, safety, and high performance. Our equipment is also constantly refined by our quest for ultimate hydraulics that combine great power with flexible motion control.

1 Solenoid Valve

1) SE/SED-G01-40 Series

We have added the SED series using the DIN connector wiring system to the low power type.
CE Approval
We have prepared a terminal box/DIN connector wiring product and a connector (M12-4 pin connector) wiring product, so selection using the formal auxiliary symbol is possible.
Surge-less Circuit is standard equipment
The connector wiring product can be directly connected to a wire-saving system such as Device Net, etc.

2)SAW Series Solenoid Valve with Monitoring Switch (SAW-G01)

It is a solenoid valve that monitors the direction switch position of the valve and possesses the function of outputting a signal.
It operates the switch directly with the valve operation so reliable output can be obtained.
It does not use magnetic sensors or proximity sensors so the temperature drift and hysteresis are smaller than before.

3)SA Series Wet Type Solenoid Operated Directional Control Valve (G03)

Highly reliable wet solenoid structure
DIN connector type for highly waterproof performance JIS C 0920 IP65
Shockless type also available to prevent shock when switching
Coil can rotate by 360°. Can be mounted even in a small space.

2 Motor

1)Swing Motor-PCR Series Swing motor
Improved arrangement of components and decreased height enable installation under the driver's seat.
No need for gear oil replacement.
Parking brake can be built into the hydraulic motor, enabling safer parking on an incline.
Shockless relief is standard equipment to enable smooth Swing.

2)Traveling Motor-PHV Series 2-Speed Wheel Motor

Compact size
Integrated structure consisting of hydraulic motor, hydraulic valve and reduction gear enables compact size.
High-speed movement
Employs a 2-speed hydraulic motor for increased traveling speed Applicable for a wide range of uses from powerful operation to high-speed movement
Smooth stopping performance
Built-in brake valve for stable stopping performance
Rich variety of options
Options include a parking brake and shockless relief to enhance starting/stopping performance.

3 Pump

1)Piston Pump-PVD Series Piston Pump

One pump discharges two equal amounts of flow to ensure shovel straightness.
Constant horsepower control with full use of engine horsepower, resulting in increased speed and power for mother machine.
Compact size enables installation in a small engine room.

2)PVK Series Piston Pump

Constant horsepower control with full use of engine horsepower, resulting in increased speed and power for mother machine.
Load sensing control can be achieved with our DPK load sensing valve, resulting in energy savings for mother machine.
Compact size enables installation in a small engine room.


3)PZ Series Piston Pump

Half-cylindrical swash plate for low noise and low pulsation
Spherical valve plate for high efficiency (Employed into 3B, 4B and 6B.)
Various capacities ranging from 35 to 220cm3/rev (7 sizes in total)
Multiple string option with our IPH series inscribed gear pump.
The electro-hydraulic proportional control valve uses the proven force feed-back system for improved hysteresis, repeatability, and response.

4)PVS Series Piston Pump

Half-cylindrical swash plate for low noise and low pulsation
Rich set of options to enable highly efficient, energy-saving equipment.

5)PZS Series Piston Pump

Half-cylindrical swash plate and 11 pistons for low noise and low pulsation
Spherical valve plate for high efficiency
Multiple string option with our IPH series inscribed gear pump.

6)Unipump-UVN Series Unipump

Enhanced hydraulic pump and electromotor efficiency for decreased electric consumption (Electric motor IE3 premium efficiency compatible)

Compact size for space-saving unit design
Original connection method between pump and electromotor shaft for low noise and long life

4 Unit

Power Package-NRP series Power Package

Energy saving
Power consumption: 50W (*1)?(approx. 95% down)
Low noise
57 dB(A) during operation
Zero noise during stop
Low heat output
Oil temperature is room temperature + 7°C (*1)
Compact
35% smaller footprint compared to our standard unit
When accumulator is installed (OPTION)
→Pressure is maintained even when it’s stopped?to improve energy saving

1. These values are measured in machining center of our factory. They depend on the hydraulic circuit and the size and number of hydraulic cylinders installed on the machine.

Have a Question You'd Like to Discuss with us ?

ADDRESS: ANSON ROAD INTERNATIONAL PLAZA SINGAPORE 079903

Warehouse Address:
1) 1586 Tampines Industrial Avenue 5 Singapore 526818
2) 1262 Waterford Way, Suite 400 Miami, FL 33126 U.S.A.
3) 181 Dixie Road Mississauga, Ontario L8T 1P6 Canada

 

Send Inquiry

*Email

Please Enter your Email Address

Subject

Inquiry About

Quick question
Please select FAQ

I'm very interested in your products; could you send me some detail reference information?

Please send me detail product specification, thank you!

May I be an agency of your products,and what's yourterms?

We intend to purchase this product, would you please send me the quotation and minimum order quantity?

*Message
I want to buy

For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ

 
Single row bearing
215P Sealed Single Row Radial Bearing
(10) NEW FAG KYK SINGLE ROW BALL BEARINGS 62052RS 62062RSRC3 203KRR2SRI2
MRC 211SZZ DEEP GROOVE SINGLE ROW BALL BEARING NNB
Double row bearing
FAG Bearings FAG 2205-2RS-TV Self-Aligning Bearing, Double Row, Double Sealed,
Bower 5204 KZZE Double Row Bearing, (Compare 2 SKF)
32032Z Budget Shielded Double Row Angular Contact Ball Bearing 17x40x17.5mm
Multi-row bearing
SNR Umlenk-/Führungsrolle, Zahnriemen GE357.03
OPTIMAL 502629 RADLAGERSATZ
Zahnriemensatz VOLVO - Febi Bilstein 28589
About Us
Company Profile
Contact Info
Site Map